Epson Disc producer PP-100N Security

102
Mode change IV
Use the following procedure to change from PIN Controlled Mode to Security Mode, or from Security Mode to PIN
Controlled Mode.
1
Check that all jobs are finished.
See “Checking the job processing status” on page 72 in this guide for details on the check procedure.
2
Take out all the discs from Stacker 2.
3
Check that the disc cover is locked.
4
Log in to EPSON Total Disc Net Administrator.
See “Logging in to EPSON Total Disc Net Administrator” in the PP-100N Security User’s Guide for the login
procedure.
5
Click the [System settings] tab.
Changing the Publish Mode deletes the spool data.