Note:
❏ Make sure you pull out and extend the output tray extensions so that they are a little bit longer than the length of the
original, and raise the stopper so that the ejected originals can be stacked comfortably on the output tray.
❏
e
stopper can move forward and backward on the central output extension so that you can easily adjust the stopper
position to the best position for the originals being scanned.
Originals of A5 (210 mm) or longer up to A4 (297 mm)
Open and extend the input tray, and then raise the stopper of the Flatbed Scanner Dock.
Using the Flatbed Scanner Dock
>
About the Flatbed Scanner Dock
>
Notes on Using the Flatbed Scanne
…
140
To Next Page
Loading...
