& “Placing Laminated Cards” on page 44
& “Placing Envelopes” on page 56
& “Cleaning Inside the Scanner” on page 148
Lights
A
Error light An error has occurred. See “Light Error Indicators” for more details.
B
Automatic Feeding Mode
light
The scanner is in Automatic Feeding Mode. Scanning starts when
an original is placed in the input tray.
C
Ready light On: The scanner is ready to be used.
Flashing: The scanner is scanning, waiting to scan,
processing, or sleeping.
O: The scanner cannot be used because the power
is
o
or an error has occurred.
D
Skip double feed detection
light
This is on when skipping double feed detection is enabled.
E
Slow mode light This is on during slow mode.
Related Information
& “Error Indicators” on page 22
& “Scanning
Dierent
Sizes or Types of Originals One by One (Automatic Feeding Mode)” on page 90
Scanner Basics
>
Buttons and Lights on the Control Panel
>
Lights
21
To Next Page
Loading...
