Epson DS-530 II

Note:
❏ To scan envelopes, we recommend selecting the appropriate rotation angle or Auto in Rotate on the Main Settings
tab in the Epson Scan 2 window before scanning. See the Epson Scan 2 help for details.
❏ To scan envelopes,set the appropriate setting in the Epson Scan 2 window.
When you are using Document Capture Pro, you can open the Epson Scan 2 window by pressing the Detailed
Settings button on the Scan Settings screen.
Select
O
in Detect Double Feed on the Main Settings tab. See the Epson Scan 2 help for details.
If you forget to disable Detect Double Feed in Epson Scan 2 and a double feed error occurs, remove the envelope
from the ADF and then reload it, press the
(Double Feed Detection Skip) button on the scanner as shown below
to disable Detect Double Feed for the next scan, and then scan again.
e
(Double Feed Detection Skip) button
only disables Detect Double Feed for one sheet.
Related Information
& “Required Settings for Special Originals in Epson Scan 2 Window” on page 79
Mixture of Originals
Specications of Originals that are a Mixture of Dierent Sizes
You can load a mixture of originals from 50.8×50.8 mm (2.0×2.0 in.) to A4 (or Letter) size. You can also load a
mixture of paper types or thickness.
c
Important:
❏ When placing and scanning originals that are a mixture of dierent sizes, originals may be fed askew because
not all of the originals are supported by edge guides.
❏ Originals may be jammed or fed askew if you set dierent types or very dierent sizes of originals, such as in the
following cases.
· in paper and ick paper
· A4 size paper and card size paper
If originals are fed askew, check whether or not the scanned image is available.
Specications of Originals and Placing Originals > Placing Originals > Mixture of Originals
58