Epson DS-530 II

Note:
To scan laminated cards, set the appropriate setting in the Epson Scan 2 window.
When you are using Document Capture Pro, you can open the Epson Scan 2 window by pressing the Detailed Settings
button on the Scan Settings screen.
❏ Select Scan laminated card on the Settings window on the Main Settings tab in Epson Scan 2 to increase the
accuracy of auto size detection. See the Epson Scan 2 help for details.
❏ Select O in Detect Double Feed on the Main Settings tab in Epson Scan 2. See the Epson Scan 2 help for details.
If you forget to disable Detect Double Feed in Epson Scan 2 and a double feed error occurs, remove the card from
the ADF and then reload it, press the
(Double Feed Detection Skip) button on the scanner as shown below to
disable Detect Double Feed for the next scan, and then scan again. e
(Double Feed Detection Skip) button
only disables Detect Double Feed for one sheet.
Related Information
& “Required Settings for Special Originals in Epson Scan 2 Window” on page 79
Large Size Originals
Specications
of Large Size Originals
By using the Carrier Sheet sold separately and folding the originals in half, you can scan originals larger than A4
size, such as A3 or B4 sizes.
Size Thickness Paper Type Loading Capacity of the
Carrier Sheet
Up to A3 0.3 mm (0.012 in.) or less
(excluding the thickness of
the Carrier Sheet)
Plain paper
Fine paper
Recycled paper
5 carrier sheets
Specications of Originals and Placing Originals > Placing Originals > Large Size Originals
46