Placing Large Size Originals
1.
Open the input tray and extend the input tray extension. Slide out the output tray, extend the output tray
extension, and then raise the stopper.
2.
Slide the edge guides on the input tray all the way out.
3.
Place the Carrier Sheet with the illustration on the front edge facing up and place the original in the carrier
sheet by folding it in half so that the side to be scanned is facing out, with the right side at the front.
Specications of Originals and Placing Originals
>
Placing Originals
>
Large Size Originals
47
To Next Page
Loading...
