If multiple originals are fed frequently, try the following.
❏ If you load unsupported originals, the scanner may feed multiple originals at a time.
❏ Clean the rollers inside the scanner.
❏ Reduce the number of originals being placed at a time.
❏ Press the
button to slow down the scanning speed.
❏ Use Automatic Feeding Mode, and scan originals one by one.
When you are using Document Capture Pro, you can open the Epson Scan 2 window by pressing the Detailed
Settings button on the Scan Settings screen.
Related Information
& “Removing Jammed Originals from the Scanner” on page 166
& “Scanning
Dierent
Sizes or Types of Originals One by One (Automatic Feeding Mode)” on page 90
& “Cleaning Inside the Scanner” on page 148
Removing Jammed Originals from the Scanner
If an original has jammed inside the scanner, follow these steps to remove it.
1.
Remove all originals remaining in the input tray.
2.
Pull the lever and open the scanner cover.
Solving Problems
>
Paper Feeding Problems
>
Removing Jammed Originals from the Scanner
166
To Next Page
Loading...
