EasyManua.ls Logo

Epson DS-530 II

Epson DS-530 II
191 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Originals with wrinkles or fold lines
Perforated originals
Original with labels or stickers
Carbon-less paper
Curled originals
Coated paper
Note:
Because carbon-less paper contains chemical substances that may harm the rollers, if paper jams occur frequently, clean
the pickup roller and the separation roller.
Wrinkled originals may scan better if you slow down the feeding speed during scanning or smooth out the wrinkles before
loading.
To scan delicate originals or originals that are easily wrinkled, use the Carrier Sheet (sold separately).
To scan originals that are incorrectly detected as double feeds, press the
(Double Feed Detection Skip) button before
scanning or select O in Detect Double Feed on the Main Settings tab in Epson Scan 2 window.
When you are using Document Capture Pro, you can open the Epson Scan 2 window by pressing the Detailed Settings
button on the Scan Settings screen.
Labels or stickers must be
rmly
stuck to the originals with no glue protruding.
Try to
atten
the curled originals before scanning.
Related Information
& “Scanner Basics” on page 17
& “Maintenance” on page 147
Types of Originals that Must Not be Scanned
e
following types of originals must not be scanned.
Photos
Booklets
Bank books
Passports
Non-paper original (such as clear les, fabric, and metal foil)
Originals with staples or paper clips
Originals with glue attached
Ripped originals
Heavily wrinkled or curled originals
Transparent originals such as OHP lm
Originals with carbon paper on the back
Originals with wet ink
Originals with sticky notes attached
Specications of Originals and Placing Originals
>
Specications of Originals
>
Types of Original
32

Table of Contents

Other manuals for Epson DS-530 II

Related product manuals