Epson DS-530 II

Note:
❏ If originals are jammed or are not fed correctly, enabling Slow mode may improve feeding.
❏ Alternatively, you can scan originals of
dierent
paper sizes and types by loading them one by one using Automatic
Feeding Mode.
Placing a Mixture of Originals at
Dierent
Sizes
1.
Open the input tray and extend the input tray extension. Slide out the output tray, extend the output tray
extension, and then raise the stopper.
Note:
If there are any thick originals amongst the originals, to stop the thick originals from bumping into the output tray and
falling out, store the output tray and do not use it to stack the ejected originals.
2.
Slide the edge guides on the input tray all the way out.
Specications of Originals and Placing Originals > Placing Originals > Mixture of Originals
59