Epson DS-530 II

3.
Load the originals at the center of the input tray in descending order of paper size with the widest at the back
and the narrowest at the front.
Note:
❏ Load the originals into the input tray facing down and slightly displace the top edges at an angle facing into the ADF.
❏ Slide the originals into the ADF until they meet resistance.
❏ You can stack the originals up to 8 mm (0.31 in.).
4.
Slide the edge guides to
t
the edges of the widest original.
Related Information
& “Scanning Dierent Sizes or Types of Originals One by One (Automatic Feeding Mode)” on page 90
Specications of Originals and Placing Originals > Placing Originals > Mixture of Originals
60