Epson DS-530 II

Note:
❏ Make sure you pull out and extend the output tray extensions so that they are a little bit longer than the length of the
original, and raise the stopper so that the ejected originals can be stacked comfortably on the output tray.
❏
e
stopper can move forward and backward on the central output extension so that you can easily adjust the stopper
position to the best position for the originals being scanned.
Originals longer than Legal (355.6 mm)
Open the input tray. Do not extend the input tray extension and output tray extensions, and do not raise the
stopper.
Using the Flatbed Scanner Dock > About the Flatbed Scanner Dock > Notes on Using the Flatbed Scanne …
142