2.
Click the Job Scan tab, and then click the icon of the job you want to perform.
e
selected job is performed.
When you perform a job for which Show the preview while scanning has been selected in the Scan Settings, a
preview screen is displayed while scanning.
3.
If you execute a job that contains the following elements in the File Name Settings or Separation Settings from
Save Settings, and the elements are detected in the scanned page, the detection area is displayed on the image
as a marquee. Correct the recognition results manually if necessary, or change the area and run the recognition
again.
❏ OCR
❏ Barcode
Basic Scanning
>
Scanning from a Computer
>
Scanning Using Document Capture Pro (Windows)
64
To Next Page
Loading...
