Submenu Function
Status
This is information about errors that have
occurred on the projector.
This information may be needed if service
is required.
Serial Number
Displays the projector's serial number.
Lens Type
Displays the model number of your lens.
Event ID
When problems occur when the projector
and computer are connected through the
network, information on the problem is
displayed using an Event ID. See the
following page for information on
interpreting the Event ID.
s "About Event ID" p.189
HDBaseT Sig-
nal Level
You can display the image signal
information from the HDBaseT port.
Lamp Info Lamp Hours
You can display the cumulative lamp
operating time
*
.
When the lamp replacement time is
reached, the characters are displayed in
yellow.
Version Main
Video2
Displays the projector's firmware version
information.
Status Information
Displays the projector's status.
s "Reading the Status Information"
p.172
* The cumulative use time is displayed as "0H" for the first 10 hours. 10 hours
and above is displayed as "10H", "11H", and so on.
Reset Menu
Submenu Function
Reset Lamp
Hours
Clears the cumulative lamp hours use time. Reset when you
replace the lamp.
Reset All Memo-
ries
Resets all names and settings saved in Memory, Lens Position,
and Geometric Correction.
s "Memory Function" p.122
Reset All Config
You can reset all items in the Configuration menu to their default
settings.
The following items are not reset to their defaults: Input Signal,
Memory, User's Logo, all items for Network menus, Lamp
Hours, Language, Date & Time, Panel Alignment, Color
Uniformity, and Color Matching.
List of Functions
155
To Next Page
Loading...
Need help?
General
