c
Select Gamma, and then press the [ ] button.
d
Select Customized, and confirm using the [ ] button.
e
Select Adjust it from the image, and confirm using the [ ]
button.
f
Move the cursor on the projected image to the part where you
want to change the brightness, and then press the [
] button.
If you press [
], the image flashes and you can check the tone area
of the adjustment target.
g
Use the [ ][ ] buttons to make adjustments, and then confirm
using the [
] button.
h
When Do you want to continue adjusting the setting? is
displayed, select Yes or No.
To adjust another location, select Yes, and repeat the procedure from
step 6.
Adjusting Projected Images
93
To Next Page
Loading...
