b
Select Advanced from Image, and then press the [ ] button.
a
You can also make adjustments from Multi-Projection in the
Configuration menu.
s Extended - Multi-Projection - RGBCMY p.140
c
Select RGBCMY, and then press the [ ] button.
d
Use the [ ][ ] buttons to select the color you want to adjust,
and then press the [
] button.
e
Use the [ ][ ] buttons to select the item, and then use the
[
][ ] buttons to make the adjustments.
Each time you press the [ ] button, the adjustment screen changes.
f
To complete the corrections, press the [Menu] button.
Gamma adjustment
You can adjust differences in the halftone brightness that occurs depending
on the connected device.
You can set it by using one of the following three methods.
• Select and adjust the correction value
• Adjust while viewing the image
• Adjust using the gamma adjustment graph
Adjusting Projected Images
91
To Next Page
Loading...
