a
• To ensure a long projector service life, turn off the projector when
you are not using it. The lamp's operating life varies depending on
the Configuration menu settings, environmental conditions, and
usage conditions. The brightness of the projected image drops as
projection time elapses.
• The projector can be powered off directly by the breaker because it
supports the direct shutdown function.
a
Press the [t] button on the control panel or the remote control.
The shutdown confirmation screen is displayed.
b
Press the [t] button again. (To cancel, press any other button.)
After the buzzer beeps twice, the projected image disappears, and the
status indicator turns off.
c
Disconnect the power cord.
Turning Off the Projector
58
To Next Page
Loading...
Need help?
General
