f
Use the [ ][ ] buttons to select the tone that you want to
change, and then use the [
][ ] buttons to make the
adjustments. When you have finished making changes, confirm by
using the [
] button.
If you use the [
][ ] buttons to select the tone that you want to
change, the image flashes and you can check the tone area of the
adjustment target.
g
When Do you want to continue adjusting the setting? is
displayed, select Yes or No.
To adjust another tone, select Yes, and repeat the procedure from
step 6.
Frame Interpolation
The current and previous frames are used to create intermediate frames,
interpolating to produce smooth-moving images. You can resolve clumsy-
moving images, such as frame skipping when projecting a fast moving
image.
a
Press the [Menu] button while projecting.
b
Select Frame Interpolation from Image, and then press the [ ]
button.
Adjusting Projected Images
96
To Next Page
Loading...
Need help?
General
