a
• When Portrait Mode is On, brightness is adjusted in three
levels.
• When Portrait Mode is Off, brightness is adjusted in three or
five levels, depending on the model being used.
• You can switch the projected image between the input image
and the white image using the [
][ ] buttons.
c
Press the [Esc] button to return to the previous screen.
Fine-tuning the color balance
Adjust the brightness of the projected image and the color balance that was
adjusted by Edge Blending.
a
The brightness and color may not be uniform even after making
adjustments.
Color Matching
You can fine tune the color balance and brightness from black to white for
each color tone.
a
Select Color Matching from Multi-Projection, and then press the
[
] button.
Multi-Projection Function
105
To Next Page
Loading...
