e
Press the [Menu] button to finish making settings.
Other Settings
Settings related to basic operations
Purpose Setting Methods
To start/stop projection by turning
on/off the main power or plugging
in or unplugging the power plug of
the projector.
Set Direct Power On to On. (Default value: Off)
s Extended - Operation - Direct Power On
p.140
The projector can be powered off directly by the
breaker because it supports the direct shutdown
function.
To disable the automatic shutdown
function.
Set Sleep Mode to Off. (Default value: On)
s Extended - Operation - Sleep Mode p.140
Set A/V Mute Timer to Off.
s
Extended - Operation - A/V Mute Settings -
A/V Mute Timer p.140
To disable buzzer beeps generated
when the projector is powered on/
off.
Set Beep to Off. (Default value: On)
s Extended - Operation - Advanced - Beep
p.140
To operate the projector by
communication command even
when the power of the projector is
off.
Set Standby Mode to Communication On.
(Default value: Communication Off)
s Extended - Standby Mode p.140
To operate the projector by
communication command while
executing A/V Mute.
Set A/V Mute Release to A/V Mute.
s
Extended - Opera
t
ion - A/V Mute Settings -
A/V Mute Release p.140
The default value is Any Button. If you operate
the projector while A/V Mute is on, A/V Mute is
released.
To turn off the power by pressing
the [t] button once.
Set Standby Confirmation to Off. (Default value:
On)
s Extended - Display - Standby Confirmation
p.140
Installing the Projector
44
To Next Page
Loading...
