f
Move the cursor on the projected image to the part where you
want to change the brightness, and then press the [
] button.
If you press [
], the image flashes and you can check the tone area
of the adjustment target.
g
Use the [ ][ ] buttons to make adjustments, and then confirm
using the [
] button.
h
When Do you want to continue adjusting the setting? is
displayed, select Yes or No.
To adjust another location, select Yes, and repeat the procedure from
step 6.
Adjust using the gamma adjustment graph
Select a tone point on the graph and make adjustments.
a
Press the [Menu] button while projecting.
b
Select Advanced from Image, and then press the [ ] button.
c
Select Gamma, and then press the [ ] button.
d
Select Customized, and confirm using the [ ] button.
e
Select Adjust it from the graph, and confirm using the [ ]
button.
Adjusting Projected Images
95
To Next Page
Loading...
Need help?
General
