The following screen is displayed.
Half of the overlapped area is displayed in black so that it is easy to
check the edge of the image.
Adjustment Level: There are eight levels from white, through gray,
and up to black. You can adjust each level individually.
Red, Green, Blue: Adjusts the tone for each color.
Brightness: Adjusts the image brightness.
a
Whenever the [ ] button is pressed, the screen changes
between the projected image and the adjustment screen.
c
Select Adjustment Level, and then use the [ ][ ] buttons to set
the adjustment level.
d
Select Red, Green, or Blue, and then press the [ ][ ] buttons to
adjust the color tone.
e
Select Brightness, and then use the [ ][ ] buttons to adjust the
brightness.
f
Return to step 2 and adjust each level.
g
Press the [Esc] button to return to the previous screen.
Displaying a Scaled Image
A section of the image is cropped and displayed. This allows you to create
one large image by combining images projected from multiple projectors.
a
Project the image, and then press the [Menu] button.
b
Select Multi-Projection from Extended.
a
You can also perform the same operation from Scale in
Signal.
Multi-Projection Function
102
To Next Page
Loading...
