Connecting Image Sources
To project video images, connect to the projector using one of the following methods.
A
When using an optional component video cable (D-sub/component converter)
s "Optional Accessories" p.211
Connect the component output port on the image source to the projector's Computer port.
You can output audio from the projector's speaker or Audio Out port by connecting the audio output port on the video equipment to the projector's Audio1 port using a commercially
available audio cable.
B
When using a commercially available component video cable (RCA) and a BNC/RCA adapter
Connect the component output port on the video equipment to the projector's BNC port (R/Cr/Pr, G/Y, B/Cb/Pb).
You can output audio from the projector's speaker or Audio Out port by connecting the audio output port on the video equipment to the projector's Audio2 port using a commercially
available audio cable.
C
When using a commercially available BNC video cable (SDI input, EB-L1505U/EB-L1500U/EB-L1405U only)
Connect the SDI port on the image source to the projector's SDI input port.
D
When using a commercially available HDMI cable
Connect the HDMI port on the image source to the projector's HDMI port.
You can send the image source's audio with the projected image.
Connecting Equipment
47
To Next Page
Loading...
Need help?
General
