The adjustment pattern is displayed, and adjustment starts. If the
projected image is displayed before the adjusting, the procedure is
complete.
a
• See the following if an error occurs.
s "Automatic adjustments are not performed correctly"
p.176
• To return to the status before auto adjustment, select Undo.
When you select Redo after selecting Undo, it returns the
image to the status after auto adjustment.
• To return Color Calibration adjustment value to its default
value, select Reset.
Panel Alignment
Adjusts the pixel color shift for the LCD panel. You can adjust the pixels
horizontally and vertically by 0.25 pixel within a range of ±1 pixel.
a
• Image quality may decline after performing LCD alignment.
• Images for pixels that extend beyond the edge of the projected
screen are not displayed.
a
Press the [Menu] button while projecting.
b
Select Display from Extended.
c
Select Panel Alignment, and then press the [ ] button.
d
Enable Panel Alignment.
Image Maintenance
189
To Next Page
Loading...
Need help?
General
