Submenu Function
Reset network
settings.
To reset all of the Network settings, select Yes.
Info Menu (Display Only)
Lets you check the status of the image signals being projected and the status
of the projector. Items that can be displayed vary depending on the source
currently being projected.
Submenu Function
Projector Info Total Op.
Time
*
Displays the projector's cumulative
operating time.
Operation
Hours
Displays the operation time after turning on
the projector.
Source
You can display the source name for the
connected equipment currently being
projected.
Input Signal
You can display the content of Input
Signal set in the Signal menu according to
the source.
Resolution
You can display the resolution.
Refresh Rate
You can display the
Refresh Rate
g
.
Sync Info
You can display the image signal
information.
This information may be needed if service
is required.
List of Functions
145
To Next Page
Loading...
Need help?
General
