Epson EB-L520U User Manual

Wireless Network Projection
144
Caution
Do not disconnect the power cord or the wireless transmitter from the
projector while the network information is being written. If the power cord
or wireless transmitter is disconnected, the projector may not start
correctly. Make sure the completion message is displayed before
disconnecting the wireless transmitter.
c
Connect the other wireless transmitters if you want to continue pairing.
d
Select Yes to set Connection Guide Display to On if necessary.
a
• We recommend selecting Yes. The next time you turn on the
projector and no signal is being input, the connection guide for
the wireless transmitter (Epson Wireless Presentation) is
displayed.
• The message prompting you to set Connection Guide Display
to On is displayed when Connection Guide Display is set to
Off and Content Playback is set to Off.
• You can change the connection guide display from the
projector's Network menu.
s Network > Transmitter Settings > Connection Guide
Display
e
Remove the wireless transmitter from the projector and insert the
wireless LAN module into the same port used for the wireless
transmitter.
f
Press the [Menu] button on the control panel or remote control.
g
Make sure Wireless LAN Power is set to On in the projector's
Management menu and Simple AP is set to On in the projector's
Network Settings menu.
We recommend turning the projector off and then back on to enable the
connection guide display.
a
If you set the Auto Power On setting to On in the projector's Network
menu, you can start projection even if the projector is in standby mode
(when the power is off).
s Network > Transmitter Settings > Auto Power On
gg Related Links
• "Projector Network Settings - Network Menu" p.195
• "Installing the Wireless LAN Module" p.133
• "Selecting Wireless Network Settings Manually" p.135
• "Setting Up Wireless Network Security for Simple AP Mode" p.139
Projecting with the Wireless Presentation System
You can use the paired wireless transmitter to quickly establish direct
connection between the projector (receiver) and Windows/Mac computers
and easily project your images.
a
Make sure the wireless LAN module is installed into your projector.
a
Turn on the projector.
b
Connect the wireless transmitter to a USB port on your computer.
c
Project your content with the Epson Wireless Presentation software in
the wireless transmitter. See the Epson Wireless Presentation System
User's Guide for details.
gg Related Links
• "Installing the Wireless LAN Module" p.133

Epson EB-L520U Specifications

General

Matrix size	0.67 \
Number of colors	1.07 billion colors
Native aspect ratio	16:10
Vertical scan range	192 - 240 Hz
Projection technology	3LCD
Contrast ratio (typical)	2500000:1
Screen size compatibility	50 - 500 \
Projector native resolution	WUXGA (1920x1200)
Keystone correction, horizontal	-30 - 30 °
Projector brightness (economic mode)	3640 ANSI lumens
Light source type	Laser
Service life of light source	20000 h
Service life of light source (economic mode)	30000 h
Focus	Manual
Throw ratio	1.35 - 2.2:1
Zoom capability	Yes
Focal length range	20 - 31.8 mm
Aperture range (F-F)	1.5 - 1.7
3D	No
Video processing	10 bit
Video color modes	Cinema, Dynamic, Presentation, sRGB, DICOM simulation mode
Analog signal format system	Not supported
Serial interface type	RS-232C
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
VGA (D-Sub) ports quantity	3
USB 2.0 Type-B ports quantity	1
Wi-Fi standards	802.11a, Wi-Fi 4 (802.11n)
Noise level	31 dB
Country of origin	Philippines
Noise level (economic mode)	23 dB
RMS rated power	10 W
Placement	Ceiling, Desktop, Floor, Wall
Product type	Standard throw projector
Product color	White
Market positioning	Presentation
Cable lock slot type	Kensington
Power source	AC
AC input voltage	100-240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.3 W
Power consumption (typical)	293 W
Power consumption (economy mode)	223 W
Storage temperature (T-T)	-10 - 60 °C
Storage relative humidity (H-H)	10 - 90 %
Operating relative humidity (H-H)	20 - 80 %
Cables included	AC, HDMI
Bundled software	EasyMP Multi PC Projection
USB display function	3 in 1: Image / Mouse / Sound
Sustainability certificates	TCO
Software support	via: AMX, Crestron (Network), Control4, Crestron Integrated Partner, Extron IP Link, Extron XTP, AMX Device Discovery, Control4 Simple Device Discovery Protocol
Pallet weight	0 g
Quantity per pack	1 pc(s)
Quantity per pallet	14 pc(s)
Harmonized System (HS) code	85286200

Weight and Dimensions

Depth	122 mm
Width	440 mm
Height	304 mm
Weight	7700 g
Package depth	530 mm
Package width	540 mm
Package height	210 mm
Package weight	10450 g