Epson EB-L520U - Adjusting the Image Resolution; Adjusting the Brightness

Adjusting the Brightness
81
You can adjust the brightness of your projector's light source.
a
Turn on the projector and switch to the image source you want to use.
b
Press the [Menu] button on the control panel or remote control.
c
Select the Operation menu and press [Enter].
d
Select Light Source Brightness Control and press [Enter].
e
If you want to maintain the brightness at a specific level, select the
Maintain Brightness setting and select On.
f
If you turn on Maintain Brightness, select the Maintain Brightness
Level setting and check the Estimated Remains information.
g
If you turn off Maintain Brightness, select the Light Source Mode
setting:
• Normal lets you set the brightness to the maximum level. This makes
the light source operation time approximately 20,000 hours.
• Quiet lets you set the brightness to 70% and reduces fan noise. This
makes the light source operation time approximately 20,000 hours.
• Extended lets you set the brightness to 70% and extends the life
expectancy of the light source. This makes the light source operation
time approximately 30,000 hours.