Screen Sharing
153
d
Select Start Screen Sharing.
e
Specify the projector you want to share your screen with.
A
Enter the IP address using the numeric keypad.
B
Enter the projector keyword using the numeric keypad, if required. The
projector keyword is displayed on the projected image of the receiving
projector.
C
Displays the connection history. To connect to a projector that you have
previously connected to, select the IP address from the displayed list.
f
Select Connect.
When the connection is established, the bar indicating the shared status
appears at the upper right of the screen. You can drag and drop the
shared status bar position.
g
Repeat steps 3 and 6 as needed to connect to more projectors.
h
Select the input source to project images you want to share.
The image is distributed to the receiving projectors.
gg Related Links
• "Finishing the Screen Sharing" p.153
Finishing the Screen Sharing
To finish sharing, select the icon on the shared status bar. This option
disconnects all projectors at one time. If you want to disconnect specific
projector, follow the steps below.
a
Press the [Home] button.
To Next Page
Loading...
