EasyManuals Logo

Epson EB-L520U User Manual

Epson EB-L520U
267 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #28 background imageLoading...
Page #28 background image
Installing the Safety Wire
28
c
Loop the safety wire through the carabiner on the ceiling mount, and
attach both ends to the carabiner on the projector.
Warning
Do not attach the safety wire to the security cable attachment point.
d
Tighten the carabiner lock.
When Using the Ceiling Mount ELPMB30
You can attach a safety wire to your projector for increased safety as shown.
Before you start, make sure you have firmly installed the ELPMB30 ceiling
mount on the projector and have the following items included in the safety
wire set:
Safety wire × 1
Carabiner × 2 (Only one carabiner is used for the ELPMB30.)
Wire clamp × 1
Attaching screw (M4 × 10 mm) × 1
a
For details on installing the ELPMB30, see the ELPMB30 User's Guide.
a
Attach the wire clamp to the carabiner, and then use the screw to fix
the wire clamp to the screw into the wire clamp fixing point on the
projector.

Table of Contents

Other manuals for Epson EB-L520U

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson EB-L520U and is the answer not in the manual?

Epson EB-L520U Specifications

General IconGeneral
Matrix size0.67 \
Number of colors1.07 billion colors
Native aspect ratio16:10
Vertical scan range192 - 240 Hz
Projection technology3LCD
Contrast ratio (typical)2500000:1
Screen size compatibility50 - 500 \
Projector native resolutionWUXGA (1920x1200)
Keystone correction, horizontal-30 - 30 °
Projector brightness (economic mode)3640 ANSI lumens
Light source typeLaser
Service life of light source20000 h
Service life of light source (economic mode)30000 h
FocusManual
Throw ratio1.35 - 2.2:1
Zoom capabilityYes
Focal length range20 - 31.8 mm
Aperture range (F-F)1.5 - 1.7
3DNo
Video processing10 bit
Video color modesCinema, Dynamic, Presentation, sRGB, DICOM simulation mode
Analog signal format systemNot supported
Serial interface typeRS-232C
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
VGA (D-Sub) ports quantity3
USB 2.0 Type-B ports quantity1
Wi-Fi standards802.11a, Wi-Fi 4 (802.11n)
Noise level31 dB
Country of originPhilippines
Noise level (economic mode)23 dB
RMS rated power10 W
PlacementCeiling, Desktop, Floor, Wall
Product typeStandard throw projector
Product colorWhite
Market positioningPresentation
Cable lock slot typeKensington
Power sourceAC
AC input voltage100-240 V
AC input frequency50 - 60 Hz
Power consumption (standby)0.3 W
Power consumption (typical)293 W
Power consumption (economy mode)223 W
Storage temperature (T-T)-10 - 60 °C
Storage relative humidity (H-H)10 - 90 %
Operating relative humidity (H-H)20 - 80 %
Cables includedAC, HDMI
Bundled softwareEasyMP Multi PC Projection
USB display function3 in 1: Image / Mouse / Sound
Sustainability certificatesTCO
Software supportvia: AMX, Crestron (Network), Control4, Crestron Integrated Partner, Extron IP Link, Extron XTP, AMX Device Discovery, Control4 Simple Device Discovery Protocol
Pallet weight0 g
Quantity per pack1 pc(s)
Quantity per pallet14 pc(s)
Harmonized System (HS) code85286200
Weight and Dimensions IconWeight and Dimensions
Depth122 mm
Width440 mm
Height304 mm
Weight7700 g
Package depth530 mm
Package width540 mm
Package height210 mm
Package weight10450 g

Related product manuals