Epson EB-L520U - Viewing the Status Display

Viewing the Status Display
226
You can monitor the projector's status and view error information from the
status display.
a
Turn on the projector.
b
Press the [Menu] button on the control panel or remote control.
c
Select the Management setting and press [Enter].
d
Select Display Logs and press [Enter].
e
Select Display Status and press [Enter].
f
Press the left or right arrow buttons to view different categories of
information.
• Status Information: The projector's operating status
• Source: Input signal information
• Signal Information: Input digital signal information
• Network Wired: Wired LAN settings
• Network Wireless: Wireless LAN settings
• Maintenance: Operating time for the projector and light source
• Version: The projector's firmware version
gg Related Links
• "Projector Status Display Messages" p.226
Projector Status Display Messages
Categories on the status display let you view information about the projector
and its operation.
a
Status messages are available only in English.
Status Information category
Information Description
System See the System status information table.
Source Displays the source currently being used.
On-ScreenDisplay Displays the settings for on-screen displays. When turned
off, menus or messages are not displayed on the projected
images.
A/V Mute Displays the A/V Mute status.
Intake Air Temp Displays the air intake temperature.
Internal Temp Lv Displays the projector's internal temperature.
Laser Status Displays the operating status of the light source.
Source category