Controlling a Networked Projector Using a Web Browser
158
a
You can also check the projector's log files by entering
"https://<projector's IP address>/logs/" into your browser's
URL bar when you set Log Save Destination to USB and
Internal Memory in the projector's Management menu.
• In Content Playback mode
A
Controls the projector remotely.
B
Selects the playlist you want to play, and allows you to create or edit
playlists.
C
Displays the Time Table screen.
D
Operates the projector's menu settings with your finger or mouse.
E
Displays the projector's status.
F
Opens the Crestron Connected operation window. Available only when
you set the Crestron Connected system.
G
Sets detailed projector settings.
H
Displays the Developer's Menu screen.
I
Displays a test pattern.
J
Registers or deletes the data for a playlist on the USB flash drive.
e
Select the option corresponding to the projector function you want to
control.
a
• You may need to log in to access some of the options on the
Epson Web Control screen. If you see a log in window, enter
your user name and password.
• When accessing the Basic Control option, the user name is
EPSONREMOTE and the default password is guest.
• When accessing other options, the user name is
EPSONWEB and the default password is admin.
• You can change the password in the projector's Network
menu.
s Network > Network Settings > Remote Password
s Network > Network Settings > Web Control Password
gg Related Links
• "Web Control Options" p.158
Web Control Options
Basic Control
Options on the Basic Control screen allow you to select the input source and
control the projector.
To Next Page
Loading...
