Projector Network Settings - Network Menu
145
Setting Options Description
Notified IP Address IP address Enter the IP address to receive the
projector's operating status when the
PJLink notification function is enabled.
Enter the addresses using 0 to 255 for
each address field.
Do not use these addresses: 127.x.x.x or
224.0.0.0 through 255.255.255.255
(where x is a number from 0 to 255).
Available only for models that support
wired LAN projection.
gg Related Links
• "List of Functions" p.10
Network Menu - Others Menu
Settings on the Others menu let you select other network settings.
s Network > Network Configuration > Others
Setting Options Description
Secure HTTP On
Off
To strengthen security, communication
between the projector and computer in
Web control is encrypted. When setting
security with Web control, it is
recommended to set this to On.
Web Server Cert. — Imports the Web server certificate for
secure HTTP.
Priority Gateway * Wired LAN
Wireless LAN
You can set the priority gateway.
AMX Device
Discovery *
On
Off
Set to On when you want to allow the
projector to be detected by AMX Device
Discovery.
Crestron
Connected *
On
Off
Set to On only when monitoring or
controlling the projector over the
network using Crestron Connected.
Enabling Crestron Connected disables
the Epson Message Broadcasting feature
in the Epson Projector Management
software.
Control4 SDDP * On
Off
Set to On to allow device information to
be acquired using Control4 Simple
Device Discovery Protocol (SDDP).
Message
Broadcasting
On
Off
Set to On to receive the message
delivered by Epson Projector
Management. See the Epson Projector
Management Operation Guide for details.
Available only when Crestron
Connected is set to Off.
* Available only for models that support wired LAN projection.
gg Related Links
• "Crestron Connected Support" p.119
• "List of Functions" p.10
To Next Page
Loading...
Need help?
General
