Yes: Saves the settings and exits the Network menu.
No: Does not save the settings and exits the Network menu.
Cancel: Continues displaying the Network menu.
Soft keyboard operations
The Network menu contains items that require input of alphanumerics
during setup. In this case, the following software keyboard is displayed.
Press the [
][ ][ ][ ] buttons on the remote control or the [w][v]
[
a][b] buttons (or the [Wide][Tele]) on the control panel. Use the buttons
to move the cursor to the desired key, and then press the [
] button.
Enter figures by holding down the [Num] button on the remote control,
and pressing the numeric buttons. After inputting, press Finish on the
keyboard to confirm your input. Press Cancel on the keyboard to cancel
your input.
• Each time the CAPS key is selected and the [ ] button is pressed, it
sets and changes between upper case and lower case letters.
• Each time the SYM1/2 key is selected and the [
] button is pressed, it
sets and changes the symbol keys for the section enclosed by the frame.
List of Functions
92
To Next Page
Loading...
Need help?
Image
