EasyManuals Logo

Epson EB-W22 User Manual

Epson EB-W22
146 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #98 background imageLoading...
Page #98 background image
Others menu
Submenu Function
SNMP
Set to On to monitor the projector using SNMP.
To monitor the projector, you need to install the SNMP manager
program on your computer. SNMP should be managed by a
network administrator.
The default value is Off.
Trap IP Address
1/Trap IP Ad‐
dress 2
You can register up to two IP addresses for the SNMP trap
notification destination. You can enter a number from 0 to 255 in
each field of the address. However, the following IP addresses
cannot be used. 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x
is a number from 0 to 255)
AMX Device Dis‐
covery
When the projector is connected to a network, set this to On to
allow the projector to be detected by
AMX Device Discovery
g
.
Set this to Off if you are not connected to an environment
controlled with a controller from AMX or AMX Device
Discovery.
Submenu Function
Crestron Room‐
View
(EB-X25/EB-W22/
EB-X22/EB-X20
only)
Set this to On only when monitoring or controlling the projector
over the network using Crestron RoomView
®
. Otherwise, set
this to Off.
s "About Crestron RoomView
®
(EB-X25/EB-W22/EB-X22/
EB-X20 only)" p.75
When this is set to On, the following functions are not available.
Web control
Message Broadcasting (EasyMP Monitor plugin)
Bonjour
Set this to On when connecting to the network using Bonjour.
See Apple's Web site for more information on the Bonjour
service.
s http://www.apple.com/
Message Broad
casting
You can switch the EPSON Message Broadcasting function to
enable or disable.
List of Functions
98

Table of Contents

Other manuals for Epson EB-W22

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson EB-W22 and is the answer not in the manual?

Epson EB-W22 Specifications

Image IconImage
color light output3, 000 lumen - 2, 100 lumen (economy)
white light output3, 000 lumen - 2, 100 lumen (economy)
resolutionWXGA, 1280 x 800, 16:10
contrast ratio10, 000:1
lamp power200 W
Optical IconOptical
projection ratio1.30 - 1.56:1
zoom factor1.2
projection size33 inches - 318 inches
projection distance wide/tele1.68 m - 2.02 m (60 inch screen)
focal distance16.9 mm - 20.28 mm
Connectivity IconConnectivity
usb display function3 in 1: Image / Mouse / Sound
interfacesUSB 2.0 Type B, RS-232C, Ethernet interface (100 Base-TX / 10 Base-T), VGA in (2x), VGA out, HDMI in, Composite in, Component in (2x), S-Video in, RGB in (2x), Stereo mini jack audio out, Stereo mini jack audio in (2x), Cinch audio in
epson iprojection appAd-Hoc / Infrastructure
General IconGeneral
energy use270 W, 223 W (economy), 0.47 W (standby)
dimensions single carton363 x 397 x 160 mm
carton weight4.11 Kg

Related product manuals