Epson EcoTank Pro M15180 Series - Page 356

Conguring Basic SSL/TLS Settings
If the printer supports the HTTPS server feature, you can use an SSL/TLS communication to encrypt
communications. You can congure and manage the printer using Web Cong while ensuring security.
Congure
encryption strength and redirect feature.
1.
Access Web Cong and select the Network Security tab > SSL/TLS > Basic.
2.
Select a value for each item.
❏ Encryption Strength
Select the level of encryption strength.
❏ Redirect HTTP to HTTPS
Redirect to HTTPS when HTTP is accessed.
3.
Click Next.
A conrmation message is displayed.
4.
Click OK.
e
printer is updated.
Related Information
& “Application for Conguring Printer Operations (Web Cong)” on page 246
Conguring a Server Certicate for the Printer
1.
Access Web
Cong
and select the Network Security tab > SSL/TLS >
Certicate
.
2.
Specify a certicate to use on Server Certicate.
❏ Self-signed Certicate
A self-signed certicate has been generated by the printer. If you do not obtain a CA-signed certicate,
select this.
❏ CA-signed Certicate
If you obtain and import a CA-signed certicate in advance, you can specify this.
3.
Click Next.
A
conrmation
message is displayed.
4.
Click OK.
e
printer is updated.
Related Information
& “Application for Conguring Printer Operations (Web Cong)” on page 246
& “Conguring a CA-signed Certicate” on page 351
& “Updating a Self-signed Certicate” on page 354
Administrator Information > Advanced Security Settings > SSL/TLS Communication with the Printer
356