Projector Setup Settings - ECO Menu
127
Settings on the ECO menu let you customize projector functions to save
power.
When you select a power-saving setting, a leaf icon appears next to the menu
item.
Setting Options Description
Brightness Settings Selects the brightness mode of the
projector.
Light Source Mode Light Source Mode: sets the brightness
for the light source.
• Normal: maximum brightness.
• Quiet: 70% brightness with reduced
fan noise.
• Extended: 70% brightness and extends
the life expectancy of the light source.
• Custom: select a custom brightness
level.
Brightness Level Brightness Level: select the Custom
brightness level you want.
Available when Light Source Mode is set
to Custom.
Setting Options Description
Sleep Mode On
Off
Automatically turns off the projector
after an interval of inactivity (when On).
Sleep Mode Timer 1 to 30 minutes Sets the interval for Sleep Mode.
A/V Mute Timer On
Off
Automatically turns off the projector
after 30 minutes if A/V Mute is enabled
(when On).
Standby Mode Available when you have set A/V Output
to While Projecting.
Standby Mode Communication On indicates that the
projector can be monitored over a
network when the projector is in standby
mode. Enable this setting to allow the
following operations to occur when the
projector is in standby mode:
• Monitor and control the projector over
a network
Port Selects the port to use from Wired LAN
or Wireless LAN while the Standby
Mode setting is set to Communication
On.
ECO Display On
Off
Displays a leaf icon in the bottom left
corner of the projected screen to indicate
the power-saving status when the light
source brightness changes (when On).
Reset — Resets all adjustment values on the ECO
menu to their default settings, except for
Standby Mode.
a
• When the Sleep Mode Timer setting is enabled, and if there is no
signal input for a certain period of time, the light source dims before
the projector turns off.
gg Related Links
• "Projector Setup Settings - Extended Menu" p.119
To Next Page
Loading...
