Adjusting the Image Color
55
the dark areas of images become brighter, but the color saturation for
lighter areas may become weaker.
g
Press [Menu] or [Esc] to exit the menus.
Adjusting the Skin Tone
You can make fine adjustments to the color tone by adjusting the G-M
Correction setting.
a
Turn on the projector and switch to the image source you want to use.
b
Press the [Menu] button on the control panel or remote control.
c
Select the Image menu and press [Enter].
d
Select White Balance and press [Enter].
e
Select G-M Correction and press [Enter].
f
Press the left or right arrow button to adjust the skin tone of the image.
Higher values tint the image blue and lower values tint the image red.
g
Press [Menu] or [Esc] to exit the menus.
To Next Page
Loading...
Need help?
General
