Wireless Network Projection
96
a
To correctly read the QR code, make sure you face the screen
squarely and closely enough so that the projected code fits into
the guide of the mobile device's QR code reader. If you are too
far from the screen, the code may not be read.
When a connection is established, select Contents menu from , and
then select the file you want to project.
gg Related Links
• "Controlling a Networked Projector Using a Mobile Device" p.96
Controlling a Networked Projector Using a Mobile Device
Once you have connected your projector and mobile device, you can select
projector settings and control projection using Epson iProjection
(iOS/Android). This lets you access the projector remotely.
a
Make sure you have installed the latest version of Epson iProjection
(iOS/Android) on your device (V1.4.0 or later supports this feature).
a
Tap in Epson iProjection to display the menu.
b
Tap Remote Control on the menu.
You see the remote control screen.
a
• If necessary, enter the password set in the Remote Password
setting. Once the password is recognized, you do not have to
enter it again.
• You can change the password in the Remote Password setting
in the projector's Network menu.
s Network > Network Configuration > Basic > Remote
Password
c
Select the icon corresponding to the projector function you want to
control.
A
Displays the menu
B
Power button control
C
Changes to the image from each input source
D
Enables/disables the HDMI Link features
E
HDMI Link control button controls
F
Sets the projector's Image menu settings
G
Sets the projector's useful menu settings
H
A/V Mute/Volume button controls
I
Opens the touch pad screen to operate the projector's menu screens
J
Selects the target projector
To Next Page
Loading...
Need help?
General
