Epson EH-LS100 - Selecting Wireless Network Settings Manually

Wireless Network Projection
92
b
Connect the Wireless LAN module to the wireless LAN module slot.
Selecting Wireless Network Settings Manually
Before you can project from your wireless network, you need to select
network settings for the projector.
a
Press the [Menu] button on the control panel or remote control.
b
Select the Network menu and press [Enter].
c
Select On as the Wireless LAN Power setting.
d
Select Network Configuration and press [Enter].
e
Select the Basic menu and press [Enter].
f
Select the basic options as necessary.
• Projector Name lets you enter a name up to 16 alphanumeric
characters long to identify the projector over the network.