EasyManuals Logo

Epson EH-LS100 User Manual

Epson EH-LS100
175 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #145 background imageLoading...
Page #145 background image
Projector Indicator Status
145
Indicator and status Problem and solutions
Power: Off
Status: Flashing blue
Laser: Off
Temp: Lit orange
Projector has overheated and turned off. Leave it turned
off to cool down for 5 minutes.
Make sure that the vents and air filter are not clogged
with dust or obstructed by nearby objects.
Clean or replace the air filter.
If operating the projector at high altitude, set the High
Altitude Mode setting to On in the projector's
Extended menu.
s Extended > Operation > High Altitude Mode
If the problem persists, unplug the projector and
contact Epson for help.
Power: Flashing blue
Status: Indicator status
varies
Laser: Flashing orange
Temp: Indicator status
varies
Laser warning.
Turn the projector off, unplug it, and contact Epson for
help.
Power: Off
Status: Flashing blue
Laser: Lit orange
Temp: Off
Laser has a problem.
Make sure that the vents and air filter are not clogged
with dust or obstructed by nearby objects.
Clean or replace the air filter.
If the problem persists, unplug the projector and
contact Epson for help.
Power: Off
Status: Flashing blue
Laser: Off
Temp: Flashing orange
A fan or sensor has a problem. Turn the projector off,
unplug it, and contact Epson for help.
Power: Off
Status: Flashing blue
Laser: Flashing orange
Temp: Off
Internal projector error. Turn the projector off, unplug
it, and contact Epson for help.
Indicator and status Problem and solutions
Power: Flashing blue
Status: Indicator status
varies
Laser: Flashing orange
Temp: Flashing orange
Obstacle detection warning. A beep sounds, and the
message "For safety purposes remove any obstacles
blocking the lens." is displayed.
Make sure that there are no obstacles interfering with
the projection window. Remove any obstacles.
Clean the obstacle sensor if there are no obstacles.
The projector turns off automatically if no action is
taken.
Power: Off
Status: Flashing blue
Laser: Lit orange
Temp: Lit orange
Obstacle detection error. Turn the projector off, unplug
it, and contact Epson for help.
gg Related Links
"Cleaning the Air Filter" p.137
"Replacing the Air Filter" p.139

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson EH-LS100 and is the answer not in the manual?

Epson EH-LS100 Specifications

General IconGeneral
BrandEpson
ModelEH-LS100
CategoryProjector
LanguageEnglish

Related product manuals