Image Shape
40
c
Select the Settings menu and press [Enter].
d
Select Geometry Correction and press [Enter].
e
Select Quick Corner and press [Enter]. Press [Enter] again if necessary.
You see the area selection screen.
f
Use the arrow buttons to select the corner of the image you want to
adjust. Then press [Enter].
a
To reset the Quick Corner corrections, hold down [Esc] for
about two seconds while the area selection screen is displayed,
and then select Yes.
g
Press the arrow buttons to adjust the image shape as necessary.
To return to the area selection screen, press [Enter].
To Next Page
Loading...
