Projector Parts and Functions
13
Name Function
B
[Standby] button Turns the projector off.
C
[HDMI1]/[HDMI2]
button
Switches the image source between the HDMI1 and
HDMI2 (eARC/ARC) ports.
D
[Information] button Displays the Information screen.
E
[Light Output] button Displays the Light Output screen.
F
Playback control
buttons
Controls playback of the connected devices that
support the HDMI CEC standard.
G
[HDMI Link] button Displays the HDMI Link screen.
H
[Lens] button Adjusts the focus, size, and position of the projected
image.
I
[Color Mode] button Displays the Color Mode screen.
J
Arrow buttons Selects menu items while displaying the projector's
menu.
K
[Enter] button Enters the current selection and moves to the next level
while displaying the projector's menu.
L
[Default] button Returns the selected setting to its default value.
M
[Menu] button Displays and closes the projector's menu.
N
[Memory] button Displays the Memory menu.
O
[Frame Int] button Sets the strength for Frame Interpolation.
P
[RGBCMY] button Adjusts the hue, saturation, and brightness for each
RGBCMY color.
Q
[HDR] button Displays the Dynamic Range screen.
R
[Pattern] Displays the Test Pattern screen.
S
[Lens1]/[Lens2]
button
Loads the lens position registered as Memory1 or
Memory2 in the Lens Position setting.
T
[Esc] button Stops the current function.
Moves back to the previous menu level while
displaying the projector's menu.
U
[Image Enh] button Displays the Image Enhancement screen.
V
[Fine/Fast] button Displays the Image Processing screen.
Name Function
W
[Aspect] button Displays the Aspect screen.
X
[Blank] button Temporarily stops projection. To turn the image back
on, press this button again.
Y
Illumination button When you press this button, the remote control
buttons light up for approximately 10 seconds. This is
useful when operating the remote control in the dark.
Z
Remote control light
emitting area
Outputs remote control signals.
gg Related Links
• "Color Mode" p.47
• "Image Aspect Ratio" p.45
• "HDMI Link Features" p.60
• "Selecting an Image Source" p.44
• "Resizing the Image with the Zoom Feature" p.42
• "Focusing the Image with the Lens Button" p.43
• "Shutting Off the Image Temporarily" p.62
• "Displaying a Test Pattern" p.33
• "Setting Frame Interpolation" p.50
• "Adjusting the Light Source Brightness" p.51
• "Adjusting the Image Resolution" p.52
• "Adjusting the Hue, Saturation, and Brightness" p.57
• "Saving Settings to Memory and Using Saved Settings" p.63
• "Adjusting the Menu Settings" p.71
To Next Page
Loading...
Need help?
General
