Epson EH-LS12000B User Manual

Projection Modes
34
Depending on how you positioned the projector, you may need to change the
projection mode so your images project correctly.
• Front (default setting) lets you project from a table in front of the screen.
• Front/Ceiling flips the image over top-to-bottom to project upside-down
from a ceiling.
• Rear flips the image horizontally to project from behind a translucent
screen.
• Rear/Ceiling flips the image over top-to-bottom and horizontally to project
from a ceiling behind a translucent screen.
gg Related Links
• "Changing the Projection Mode Using the Menus" p.34
• "Projector Setup and Installation Options" p.16
Changing the Projection Mode Using the Menus
You can change the projection mode to flip the image over top-to-bottom
and/or left-to-right using the projector menus.
a
Turn on the projector and display an image.
b
Press the [Menu] button on the control panel or remote control.
c
Select the Installation menu and press [Enter].
d
Select Projection and press [Enter].
e
Select a projection mode and press [Enter].
f
Press [Menu] or [Esc] to exit the menus.

Epson EH-LS12000B Specifications

General

Display Technology	3LCD
Resolution	4K PRO-UHD (3840 x 2160)
Brightness	2, 700 Lumens
Contrast Ratio	2, 500, 000:1
Light Source	Laser
Keystone Correction	Vertical: ±30°, Horizontal: ±30°
Weight	12.7 kg
HDR Support	HDR10, HLG
Zoom Type	Motorized
Throw Ratio	1.35 - 2.84:1
HDMI Version	HDMI 2.1
Zoom	2.1x
Ports	HDMI (HDCP 2.3) (2x), RS-232C, LAN, Trigger out
Dimensions	520 x 193 x 482 mm (W x H x D)
Light Source Life	20, 000 hours
Input Lag	20 ms
Lens Shift	Vertical: ± 96.3 %, Horizontal: ± 47.1 %