Epson EH-LS12000B User Manual

Adjusting the Image Quality
51
Adjusting the Light Source Brightness
You can adjust the brightness of your projector's light source.
a
Turn on the projector and switch to the image source you want to use.
b
Press the [Light Output] button on the remote control.
c
Use the left and right arrow buttons to select the brightness.
d
Press [Menu] or [Esc] to exit the menus.
a
You can also set the Light Output setting in the projector's Image
menu.
Turning On Automatic Luminance Adjustment
You can turn on Dynamic Contrast to automatically optimize the image
luminance. This improves the image contrast based on the brightness of the
content you project.
a
Turn on the projector and switch to the image source you want to use.
b
Press the [Menu] button on the control panel or remote control.
c
Select the Image menu and press [Enter].
d
Select Dynamic Contrast and press [Enter].
e
Choose one of the following options and press [Enter]:
• Normal for standard brightness adjustment.

Epson EH-LS12000B Specifications

General

Display Technology	3LCD
Resolution	4K PRO-UHD (3840 x 2160)
Brightness	2, 700 Lumens
Contrast Ratio	2, 500, 000:1
Light Source	Laser
Keystone Correction	Vertical: ±30°, Horizontal: ±30°
Weight	12.7 kg
HDR Support	HDR10, HLG
Zoom Type	Motorized
Throw Ratio	1.35 - 2.84:1
HDMI Version	HDMI 2.1
Zoom	2.1x
Ports	HDMI (HDCP 2.3) (2x), RS-232C, LAN, Trigger out
Dimensions	520 x 193 x 482 mm (W x H x D)
Light Source Life	20, 000 hours
Input Lag	20 ms
Lens Shift	Vertical: ± 96.3 %, Horizontal: ± 47.1 %