Wired Network Connection
25
d
Select the Wired LAN menu and press [Enter].
e
Assign the IP settings for your network as necessary.
• If your network assigns addresses automatically, select IP Settings to
set the DHCP setting to On.
• If you must set addresses manually, select IP Settings to set the
DHCP setting to Off, and then enter the projector's IP Address,
Subnet Mask, and Gateway Address as necessary.
f
To prevent the IP address from being displayed on the network
information screen, set the IP Address Display setting to Off.
g
When you finish selecting settings, go back to the Network Settings
screen, select Set, and follow the on-screen instructions to save your
settings and exit the menus.
gg Related Links
• "Network Menu - Network Settings Menu" p.84
To Next Page
Loading...
