Image Quality Settings - Image Menu
76
Setting Options Description
Deinterlacing Off
Video
Film/Auto
Sets whether or not to convert
interlaced-to-progressive signals for
certain video image types.
• Off: for fast-moving video images.
• Video: for most video images.
• Film/Auto: for movies, computer
graphics, and animation.
This setting is only displayed when
Image Processing is set to Fine.
s Signal I/O > Image Processing
Image
Enhancement
Image Preset Mode Sets the Image Enhancement options as
a batch using preset values.
Noise Reduction Reduces flickering in images.
This setting is only displayed when
Image Processing is set to Fine.
s Signal I/O > Image Processing
MPEG Noise
Reduction
Reduces the noise or artifacts seen in
MPEG video.
This setting is only displayed when
Image Processing is set to Fine.
s Signal I/O > Image Processing
Super-resolution Reduces blurring when projecting low
resolution images.
Auto Contrast
Enhancement
Creates a clearer and sharper image by
automatically adjusting the contrast of
the projected image.
Reset Resets all adjustment values on the
Image Enhancement setting to their
default settings.
Scene Adaptive
Gamma
Various levels
available
Adjusts the coloring according to the
scene, and obtains a more vivid image.
Select a large number to enhance
contrast.
Setting Options Description
Gamma -2 to 2
Custom
Adjusts the coloring by selecting one of
the gamma correction values, or referring
to a gamma graph.
RGBCMY Various levels
available
Adjusts the hue, saturation, and
brightness of each color R (red), G
(green), B (blue), C (cyan), M (magenta),
Y (yellow) individually.
Reset to Defaults — Resets all settings for the current color
mode.
Source — Displays settings saved for each input
source.
To change settings for an input source,
make sure the source is connected and
select that source.
Aspect See the list of
available aspect
ratios
Sets the aspect ratio (width-to-height
ratio) for the selected input source.
Reset to Defaults — Resets all settings for current input
source.
Reset Image
Settings
— Resets all adjustment values on the
Image menu to their default settings.
a
The Brightness setting does not affect light source brightness. To
change the light source brightness, select the Light Output setting.
gg Related Links
• "Available Color Modes" p.47
• "Available Image Aspect Ratios" p.45
• "Adjusting the Image Quality" p.49
• "Adjusting the Image Color" p.54
To Next Page
Loading...
Need help?
General
