Epson EH-LS12000B User Manual

Input Signal Settings - Signal I/O Menu
78
Setting Options Description
Image Processing Fine
Fast
Improves the response speed for images
projected at high speed.
• Fine: improves the response speed for
images by selecting Off for Frame
Interpolation.
s Image > Frame Interpolation
• Fast: disables the Frame
Interpolation, Noise Reduction, and
MPEG Noise Reduction settings.
s Image > Frame Interpolation
s Image > Image Enhancement >
Noise Reduction
s Image > Image Enhancement >
MPEG Noise Reduction
HDMI IN EQ Level HDMI1
HDMI2
Adjusts the HDMI input signal level
depending on the devices connected to
the HDMI port. If there is a lot of
interference in the image, or if a problem
such as no image being projected occurs,
change the setting.
You can select the settings for individual
input sources without changing the input
source.
Reset to Defaults — Resets all settings for current input
source.
EDID EDID (HDMI1)
EDID (HDMI2)
Describes the display capabilities of your
projector. If images are not displayed
correctly, you may be able to display
them correctly by changing this setting.
• EDID Mode: change this setting as
necessary according to the resolution
of the image.
• HDR10+: set to Off to display images
correctly when the connected image
source does not support HDR10+.
Setting Options Description
HDMI Link Device
Connections
Lists the devices connected to the HDMI
ports.
This setting is only displayed when
HDMI Link is set to On.
HDMI Link Set to On to enable the HDMI Link
features.
Power On Link Controls what happens when you turn
on the projector or connected device.
• Off: turns off the power link.
• Bidirectional: automatically turns on
the connected device when you turn on
the projector, and vice versa.
• Device -> PJ: automatically turns on
the projector when you turn on the
connected device.
• PJ -> Device: automatically turns on
the connected device when you turn on
the projector.
Power Off Link Controls whether connected devices are
turned off when you turn off the
projector.
Reset Signal I/O
Settings
— Resets all adjustment values on the
Signal I/O menu to their default settings.
gg Related Links
• "HDMI Link Features" p.60

Epson EH-LS12000B Specifications

General

Display Technology	3LCD
Resolution	4K PRO-UHD (3840 x 2160)
Brightness	2, 700 Lumens
Contrast Ratio	2, 500, 000:1
Light Source	Laser
Keystone Correction	Vertical: ±30°, Horizontal: ±30°
Weight	12.7 kg
HDR Support	HDR10, HLG
Zoom Type	Motorized
Throw Ratio	1.35 - 2.84:1
HDMI Version	HDMI 2.1
Zoom	2.1x
Ports	HDMI (HDCP 2.3) (2x), RS-232C, LAN, Trigger out
Dimensions	520 x 193 x 482 mm (W x H x D)
Light Source Life	20, 000 hours
Input Lag	20 ms
Lens Shift	Vertical: ± 96.3 %, Horizontal: ± 47.1 %