Correcting Keystone Distortion
You can correct keystone distortion using one of the following methods.
• Correcting automatically (Auto V-Keystone)
Automatically corrects vertical keystone distortion.
• Correcting manually (H-Keystone Adjuster)
Manually corrects horizontal keystone distortion using the horizontal
keystone adjuster.
• Correcting manually (H/V-Keystone)
Manually correct distortion in the horizontal and vertical directions
independently.
• Correcting manually (Quick Corner)
Manually correct the four corners independently.
a
When you correct keystone distortion, the projected image may be
reduced.
Correcting automatically
Auto V-Keystone
When the projector detects any movement, for example when it is installed,
moved, or tilted, it automatically corrects vertical keystone distortion. This
function is called Auto V-Keystone.
When the projector remains still for about two seconds after it detects
movement, it displays a screen for adjustment and then automatically
corrects the projected image.
You can use Auto V-Keystone to correct the projected image under the
following conditions.
Correction angle: approx. 30˚ up and down
Adjusting Projected Images
29
To Next Page
Loading...
Need help?
General
Weight and Dimensions
