Hiding the Image and Sound Temporarily (A/V
Mute)
You can use this when you want to hide the image on the screen, or if you
do not want to show details such as when you are changing between files.
Each time you press the [A/V Mute] button, or open/close the lens cover
A/V Mute turns on or off.
Remote control Projector
a
• When projecting moving images, the images and sound continue to
be played back while A/V Mute is on. It is not possible to resume
projection from the point where A/V Mute was activated.
• You can select the screen displayed when the [A/V Mute] button is
pressed from the Configuration menu.
s Extended - Display - A/V Mute p.62
• When the A/V mute slide is closed for approximately 30 minutes,
Lens Cover Timer activates and the power is automatically turned
off. If you do not want Lens Cover Timer to activate, set Lens Cover
Timer to Off.
s
Extended - Operation - Lens Cover Timer p.62
• The lamp is still lit during A/V Mute, so the lamp hours continue to
accumulate.
Freezing the Image (Freeze)
When Freeze is activated on moving images, the frozen image continues to
project on the screen, so you can project a moving image one frame at a
time like a still photo. Also, you can perform operations such as changing
between files during presentations from a computer without projecting any
images if the Freeze function is activated beforehand.
Each time you press the [Freeze] button, Freeze turns on or off.
Remote control
Projection Functions
44
To Next Page
Loading...
Need help?
General
Weight and Dimensions
