Projecting Without a Computer (Slideshow)
By connecting a USB storage device such as a USB memory or a USB hard
disk to the projector, you can project the files stored on the device without
using a computer. This function is called Slideshow.
a
• You may not be able to use USB storage devices that incorporate
security functions.
• You cannot correct keystone distortion while projecting a Slideshow,
even if you press the [w] and [v] buttons on the control panel.
Specifications for files that can be projected using Slideshow
Type File Type (Ex-
tension)
Notes
Image .jpg The following cannot be projected.
- CMYK color mode formats
- Progressive formats
- Images with a resolution greater than 8192x8192
Due to the characteristics of JPEG files, images may
not be projected clearly if the compression ratio is
too high.
.bmp Cannot project images with a resolution greater
than 1280x800.
.gif • Cannot project images with a resolution greater
than 1280x800.
• Cannot project animated GIFs.
.png Cannot project images with a resolution greater
than 1280x800.
a
• When connecting and using a USB-compatible hard disk, make sure
you connect the AC adaptor supplied with the hard disk.
• The projector does not support some file systems, so use media that
has been formatted in Windows.
• Format the media in FAT16/32.
Slideshow examples
Projecting images stored on USB storage
s "Projecting the selected image" p.41
s "Projecting image files in a folder in sequence (Slideshow)" p.42
Slideshow operating methods
Although the following steps are explained based on the remote control,
you can perform the same operations from the control panel.
Starting Slideshow
a
Change the source to USB.
s "Switching to the Target Image by Remote Control" p.25
Projection Functions
39
To Next Page
Loading...
Need help?
General
Weight and Dimensions
