Projector Parts and Functions
11
Name Function
F
Power inlet Connects the power cord to the projector.
gg Related Links
• "Projector Connections" p.20
Projector Parts - Base
Name Function
A
Ceiling mount fixing
points (three points)
Attach the optional ceiling mount here when
suspending the projector from a ceiling.
B
Air exhaust vent Exhaust vent for air used to cool the projector
internally.
C
Rear feet When the projector is set up on a surface such as a
desk, turn to extend and retract the feet to adjust the
horizontal tilt.
D
Security cable
attachment point
Pass a commercially available wire lock through here
and lock it in place.
You can also attach the optional safety wire here to
prevent the projector from falling from the ceiling or
wall.
E
Air intake vent Takes in air to cool the projector internally.
F
Front adjustable foot When the projector is set up on a surface such as a
desk, extend the foot to adjust the position of the
image.
gg Related Links
• "Adjusting the Image Height" p.35
• "Installing a Security Cable" p.63
Projector Parts - Projector Remote Control
You can operate your projector and Epson streaming media player
(ELPAP12) using this remote control.